ISO 9001:2008 Registered Company
 
 

Synthetic Coolants

SUPERCOOL 100 ( Synthetic Coolants )
 

•  The captioned chemical is a new development used in place of conventional oil based emulsion forming coolant.

•  This is a mixture of Synthetic corrosion inhibitors with an excellent cooling effect of high stability at elevated temperatures thereby making them stable at    all machining conditions.

•  This Coolant has a good sequestering action therby enabling users to use it in any water available at their source (upto 200 ppm hardness)
 

Product Specification :
 
1
Colour
Green
2
Odour
Very Mild Odour
3
Active Matter
37 % ± 2 %
4
pH
9
5
Ph of 2 %
8 to 8.5
6
Specific Gravity
1.1
   
   
RECOMMENDED CONCERNTRATIONS TO BE USED ON DIFFERENT MACHINES.
   
1. On CNC Machines - 5%
2. On Lathe and other machines - 2.5% to 3.5%
3. On Grinding Machine - 3%
  
   
" Conventional cutting oils have limitations as far as application are concerned. The oils are very good lubricant but cannot given sufficient cooling effect. Hence the temp. of coolant increases & there by affects the tool life. Tool become blunt. Similarly in grinding the dressing of the grinding wheel is also affected because of poor heat transfer.

In synthetic coolant this basic need of cooling has been given Prime importance. We have added chemicals which will increase the cooling effect along with good lubrication

Synthetic coolant contain very good corrosion inhibittors hence give better corrosion prevention.

We have added special fungicides which improve the sumplife of the coolant hence can be used for a prolonged period as compared to conventional cutting oils there making them cost effective even though the basic price may be high.

Synthetic coolants contain additives which are oil repellant in nature.

Hence the tramp oil does get mixed the coolant & properties of the coolant does not vary.

Utmost care is to not taken in maintaining the concentration of synthetic coolant to get best results out of it."